여러분은 아직도IBM LOT-835인증시험의 난이도에 대하여 고민 중입니까? 아직도IBM LOT-835시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. IBM인증 LOT-835시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게IBM인증 LOT-835시험에서 고득점으로 패스하고 싶다면ITExamDump의IBM인증 LOT-835덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.
ITExamDump의 IBM인증 LOT-835덤프를 공부하여IBM인증 LOT-835시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한IBM인증 LOT-835덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. IBM인증 LOT-835시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. IBM인증 LOT-835덤프에 있는 문제만 잘 이해하고 습득하신다면IBM인증 LOT-835시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
시험 번호/코드: LOT-835
시험 이름: IBM (IBM Lotus Notes Domino 8 Application Dev)
ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
우리 ITExamDump에서는 최고이자 최신의IBM 인증LOT-835덤프자료를 제공 함으로 여러분을 도와IBM 인증LOT-835인증자격증을 쉽게 취득할 수 있게 해드립니다.만약 아직도IBM 인증LOT-835시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴수 있습니다.
LOT-835 덤프무료샘플다운로드하기: http://www.itexamdump.com/LOT-835.html
NO.1 Armand deleted a subform from a form, forgetting that the subform was used in several other forms.
How did this affect the other forms?
A.The other forms now displayed only the name of the subform, but the underlying data remained intact.
B.The subform design was deleted from the other forms. The fields that had been included on the
subform were now listed on the forms without formatting.
C.The subform on the other forms remained unchanged, and the underlying data remained intact.
D.The subform design was deleted from the other forms, fields from the subform no longer showed, but
the underlying data remained intact.
Answer:C
IBM최신덤프 LOT-835 LOT-835
NO.2 For which one of the following reasons would Richard distribute an encryption key?
A.To allow users to access a locally encrypted database
B.To allow users to read an encrypted field in his Domino application
C.To allow mail recipients who have access to his private key to read e-mails he sends
D.To allow mail recipients who have access to his public key to read the e-mails he sends
Answer:B
IBM기출문제 LOT-835인증 LOT-835
NO.3 Sam wants to display a column only if the current user is associated with the [Manager] role.
Otherwise, the column should be hidden. Which one of the following will allow him to do this?
A.Use @IsMember("[Manager]"; @UserRoles) in the hide-when field formula.
B.Use @IsNotMember("[Manager]"; @UserRoles) in the hide-when field formula.
C.Use @IsMember("[Manager]"; @UserRoles) in the hide-when view column formula.
D.Use @IsNotMember("[Manager]"; @UserRoles) in the hide-when view column formula.
Answer:D
IBM LOT-835 LOT-835 LOT-835
NO.4 Stefan has developed a form for the Portfolio database. Each document will include five photos of an
artist's work. Stefan is using a programmable table, with a Rich Text field in each of 5 rows. He has named
the table PictureTable, and the rows are named 1, 2, 3, 4, and 5. The user will select an option from the
ImageNum radio button field below the displayed image to control which image is displayed. What
formula did Stefan use in the Input Translation formula for the ImageNum field?
A.@TableRow( "PictureTable"; Imagenum ); ImageNum
B.FIELD $PictureTable := ImageNum; ImageNum
C.@SetTableRow( "PictureTable"; $Imagenum ); ImageNum
D.FIELD $PictureTable := $ImageNum; ImageNum
Answer:B
IBM최신덤프 LOT-835 LOT-835자료 LOT-835
NO.5 Rita needs to control who can edit a section on her form. The section should be unavailable to
everyone when the document is opened for reading or printing. In which one of the following ways should
Rita design the form?
A.By using a hide-when formula and a read access list
B.By using a collapsible section and a hide-when formula
C.By using expand/collapse rules and an edit access list
D.By using a controlled access section and a hide-when formula
Answer:D
IBM LOT-835 LOT-835자격증 LOT-835
NO.6 Viktor supports the Inventory database. He would like to allow users to edit the Quantity field directly in
the In Stock view, without having to open each document. What steps should Viktor follow to implement
this feature?
A.Check "Allow in-view edit" from the Properties box for the Inventory database. Click the onChange
event in the Column objects list in the Programmer's pane, and enter code to control what should happen
when a user edits the Quantity.
B.Check "Editable column" on the Info tab of the Properties box for the Quantity column. Click the
Inviewedit event in the View objects list in the Programmer's pane, and enter code to control what should
happen when a user edits the Quantity.
C.Check "Editable column" on the Info tab of the Properties box for the Quantity column. Click the
Querysave event in the Column objects list in the Programmer's pane, and enter code to control what
should happen when a user edits the Quantity.
D.Check "Allow in-view edit" from the Properties box for the Inventory database. Click the Querysave
event in the View objects list in the Programmer's pane, and enter code to control what should happen
when a user edits the Quantity.
Answer:B
IBM LOT-835 LOT-835시험문제 LOT-835 LOT-835시험문제
NO.7 Daniel is designing a Suggestions application and wants to minimize replication conflicts. Which one of
the following will accomplish this?
A.Assign users Editor access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Comment and name the form 'Comments'. Use Authors fields on both
forms.
B.Assign users Author access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Comment and name the form 'Comments'. Use Readers fields on both
forms.
C.Assign users Author access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Response and name the form 'Comments'. Use Authors fields on both
forms.
D.Assign users Editor access to the database. Create a form of type Document and name the form
'Suggestion'. Create a form of type Response and name the form 'Comments'. Use Readers fields on
both forms.
Answer:C
IBM LOT-835 LOT-835자격증 LOT-835인증 LOT-835덤프
NO.8 Marie's Windows PC has recently been upgraded to use Notes 8 Standard edition. She is preparing to
develop her first Composite Applications. Marie notices that Eclipse is not listed among the applications
on her PC. What steps should Marie follow so that Eclipse is properly installed and configured for use with
her Notes environment?
A.Run the Notes setup program and enable the options for "Eclipse runtime" and "Eclipse Developer
tools".
B.Marie should back up her files, uninstall Notes, and then install Notes 8 Basic edition. Eclipse will be
integrated automatically.
C.There is nothing Marie needs to do. Eclipse was automatically integrated into her Notes environment
when Notes 8 Standard edition was installed.
D.Marie should back up her files, uninstall Notes, and then install Notes 8 Basic edition. During the install
process, enable the options for "Eclipse runtime" and "Eclipse Developer tools".
Answer:C
IBM dumps LOT-835 pdf LOT-835 LOT-835 LOT-835기출문제 LOT-835
NO.9 Ayla has created a DB2 Access View that is working for everyone except one user. This user is listed in
the ACL with settings identical to the users whose access is working. What could be the problem?
A.The DB2NSF.ini file is missing from the user's Notes program folder.
B.The user's Person document in the Domino Directory on the Domino server needs to have the "Allow
access to external data" option enabled.
C.The ACL entry for the user is not identical to the first entry in the "User Name" field in the user's Person
document in the Domino Directory on the Domino server.
D.The user's Notes client has not been enabled for DB2 access. The administrator needs to push a policy
to the user, or the user can select File > Security > User Security, and then enable "Allow access to
external data".
Answer:C
IBM LOT-835 LOT-835인증 LOT-835
NO.10 Mary has a workflow application that uses a background server agent to route documents to users
listed in a field on each document. Which one of the following conditions would prevent the documents
from being routed by the agent?
A.If an Authors field is blank
B.If a Readers field contains a role
C.If a Readers field contains user names but no server names
D.If an Authors field contains user names but no server names
Answer:C
IBM LOT-835자료 LOT-835 LOT-835시험문제 LOT-835
NO.11 Review the following segment of code: list := "John" : "Mary" : "Julio" : "Georgio" : "Samuel"; result :=
@Text( @Compare( list; "M"; [CaseInsensitive])) Which one of the following is the value stored in the
variable "result" after this segment of code runs?
A.1
B.-1
C.A list with the values (1 : 0 : 1 : 1 : -1)
D.A list with the values (-1 : 1 : -1 : -1 : 1)
Answer:D
IBM인증 LOT-835시험문제 LOT-835 LOT-835
NO.12 Richard's form includes a field that causes a document to be mailed when the document is saved.
Which of the following is the reserved field name that Richard assigned to the field?
A.MailSend
B.ForceMail
C.SaveOptions
D.MailOptions
Answer:D
IBM LOT-835시험문제 LOT-835
NO.13 What type of element CANNOT be embedded into a page?
A.View
B.Editor
C.Navigator
D.Date picker
Answer:B
IBM최신덤프 LOT-835기출문제 LOT-835 LOT-835 LOT-835인증
NO.14 The Purchase Requisition workflow application has been very successful. But the categorized view, "By
Status", displays the status categories alphabetically: Approved, Cancelled, Denied, Draft, Submitted. Eva
needs to display the categories in the order of Draft, Submitted, Approved, Denied, Cancelled. How can
she do this?
A.Create a hidden column as the first column. Use the column formula: @If(Status=Draft;10;
Status=Submitted;20; Status=Approved;30; Status=Denied;40;Status=Cancelled;50) Sort the column
ascending.
B.Instead of directly referencing the field, change the Status column to use the formula:
@If(Status="Draft";"10"; Status="Submitted";"20"; Status="Approved";"30";
Status="Denied";"40";"50");Status
C.Create a hidden column as the first column. Use the column formula: @If(Status="Draft";"10";
Status="Submitted";"20"; Status="Approved";"30"; Status="Denied";"40";"50") Sort the column ascending.
D.Instead of directly referencing the field, change the Status column to use the formula:
@If(Status=Draft;"10"; Status=Submitted;"20"; Status=Approved;"30"; Status=Denied;"40";
Status=Cancelled;"50");Status Select the column property "Alias sorting"
Answer:C
IBM기출문제 LOT-835 LOT-835
NO.15 Briana has created a Shared Column to display the processing status of an order. The target views for
the Shared Column have different font sizes and colors. Can Briana still use a Shared Column in her
views, even if she wants to customize the font that displays the shared column information?
A.No. Shared Column display formats cannot be changed.
B.Yes, by selecting "Use Formula Only" when adding the Shared Column to the view.
C.No, she will have to copy and paste the column into her view if she wants to make customizations. She
can't use it as a Shared Column.
D.Yes. Shared Columns automatically use the format of the previous field column, so she will need to
make sure that the previous column has the font properties she wants.
Answer:B
IBM덤프 LOT-835기출문제 LOT-835 dump
NO.16 Robert needs to use the "By Last Name" view in his agent. What code snippet will allow him to do this?
A.Dim session As New NotesSession Dim db As NotesDatabase Dim view As NotesView Set db =
session.CurrentDatabase Set view = db.GetView("By Last Name")
B.Dim session As New NotesSession Dim db As NotesDatabase Dim view As NotesView Set db =
session.CurrentDatabase Set view = session.GetView("By Last Name")
C.Dim session As New NotesSession Dim db As New NotesDatabase Dim view As New NotesView Set
db = session.CurrentDatabase Set view = db.GetView("By Last Name")
D.Dim session As New NotesSession Dim db As New NotesDatabase Dim view As New NotesView Set
db = session.CurrentDatabase Set view = session.GetView("By Last Name")
Answer:A
IBM LOT-835자료 LOT-835덤프 LOT-835 LOT-835
NO.17 Jarrod wrote an agent that begins with the following LotusScript code: Dim session As New
NotesSession Dim db As NotesDatabase Dim view As NotesView Dim doc As NotesDocument Set db =
session.CurrentDatabase Set view = db.GetView( "By Category" ) Set doc =
view.GetDocumentByKey( "kitten" ) When the agent runs, which document will be referenced by the "doc"
variable?
A.The first document in the By Category view that contains the word "kitten" in any field
B.The first document in the By Category view that has a value of "kitten" in the first sorted column
C.The first document in the By Category view that has any value in the column with an alias of "kitten"
D.If the database is full-text indexed, the first document in the By Category view that contains the word
"kitten" in any field. If the database is not full-text indexed, the "doc" variable will be empty.
Answer:B
IBM자료 LOT-835기출문제 LOT-835 dump LOT-835
NO.18 Donna would like to examine the actual WSDL for the Wiring Properties/Action Definition of her
Composite Application. How can she do this?
A.Open the Domino application using Domino Designer. Select Composite Applications > Wiring
Properties. Double-click on the desired Wiring Properties.
B.Open the Composite Application using Composite Designer. Select Wiring Properties. Select the
desired Wiring Properties and click the Open File button.
C.Open the Domino application using Domino Designer. Select Composite Applications > Wiring
Properties. Select the desired Wiring Properties, and click the Open With... button, and select a text editor
(such as Windows Notepad).
D.Open the Composite Application using Composite Designer. Select Wiring Properties. Select the
desired Wiring Properties and click the Export WSDL button to save the WSDL as an external file. Open
the saved file using a text editor.
Answer:C
IBM LOT-835 LOT-835덤프 LOT-835
NO.19 Therese wants to write some LotusScript code that steps through every document in a view and
displays the Title field. She currently has the following code written: Dim session As New NotesSession
Dim db As NotesDatabase Dim view As NotesView Dim doc As NotesDocument Set db =
session.CurrentDatabase Set view = db.GetView( "By Category") Set doc = view.GetFirstDocument Do
Until (doc Is Nothing) Print doc.Title(0) '** MISSING CODE ** Loop What does she need to add on the **
MISSING CODE ** line to make the code work properly?
A.Call view.GetNextDocument()
B.Set doc = view.GetNextDocument()
C.Set doc = view.GetNextDocument(doc)
D.Nothing. The code will work properly as-is.
Answer:C
IBM LOT-835 pdf LOT-835 dump LOT-835 dump
NO.20 Jane wants to be able to change which form is used to display documents in a view. Which one of the
following will allow her to do this?
A.A bookmark property
B.A form field in a form
C.A form formula in a view
D.A computed for display form
Answer:C
IBM LOT-835덤프 LOT-835덤프
NO.21 There is a table of customer contact data at the top of the SalesOrder form. Omari needs to add a
button to the main view. When the button is clicked, users should see just the customer contact data from
the selected document, without opening the full form. How can Omari do this?
A.Create a CustInfo form, copying the customer data from the main form into a layout region on the new
form. Add a view action with the formula: @DialogBox( "CustInfo"; [NOCANCEL]:[SIZETOLAYOUT];
CustomerName )
B.Create a CustInfo form, copying the table from the main form into this new form. Add a view action
containing the formula: @DialogBox( "CustInfo";
[AUTOHORZFIT]:[AUTOVERTFIT]:[READONLY]:[SIZETOTABLE]; CustomerName )
C.Open the form and highlight the table. From the Form Properties, select "Add header to form" and save
the form. Add a view action with the formula: @DialogBox( CustomerName;
[USEHEADER]:[READONLY]:[SIZETOTABLE]; "SalesOrder" )
D.Open the form and highlight the table. From the Form Properties, select "Add header to form" and save
the form. Add a view action containing the formula: @DialogBox( "SalesOrder";
[USEHEADER]:[READONLY]:[SIZETOTABLE]; CustomerName )
Answer:B
IBM인증 LOT-835 LOT-835
NO.22 A button on a Notes document has the following LotusScript code: Dim workspace As New
NotesUIWorkspace Dim uidoc As NotesUIDocument Set uidoc = workspace.CurrentDocument Call
uidoc.GotoField("Status") Print "Approved" Where will the word "Approved" appear after the button is
clicked?
A.In a messagebox
B.On the status bar
C.In the server's log.nsf file
D.In the Status field of the current document
Answer:B
IBM LOT-835 LOT-835
NO.23 The Video application has a "Videos by Type" view that categorizes videos by movie type. Jill wants to
create an interface that will allow users to select a movie type and then display a list of video documents
for that movie type. She has created a form with a keyword field that allows users to select a movie type.
How can she display just a list of documents that match the movie type the user picked?
A.Embed the "Videos by Type" view into the form and program the embedded view "Show single
category" option to use the movie type value in the keyword field.
B.Embed the "Videos by Type" view into the form and program the embedded view "Embedded selection"
option to use the movie type value in the keyword field.
C.Create a button on the form that opens the "Video by Type" view and program the "Single Category"
view event to use the movie type value in the keyword field.
D.Create a button on the form that opens a dialog box that opens the "Video by Type" view and program
the "Single Category" view event to use the movie type value in the keyword field.
Answer:A
IBM LOT-835 LOT-835 pdf
NO.24 John is developing an application that will reside on multiple servers. He wants to be able to locate one
particular document across all database replicas. Which one of the following IDs will allow him to locate
that document?
A.DocumentID
B.RecID
C.NoteID
D.UNID
Answer:D
IBM기출문제 LOT-835 LOT-835시험문제
NO.25 Santi would like to add a column to his view to display the size of documents (including the size of any
attachments) as bytes, kilobytes, or megabytes. How can he do this?
A.Set the Column Value to @AttachmentLengths. Set the column properties to designate "Bytes (K/M/G)"
as the style.
B.Set the Column Value to @AttachmentLengths. Set the column properties to designate Number as the
style, and Bytes (K/M/G) as the number format.
C.Set the Column Value to use the "Size (bytes)" Simple Function. Set the column properties to designate
Number as the style, and Bytes (K/M/G) as the number format.
D.Set the Column Value to use the "Size (bytes)" Simple Function. Set the column properties to designate
Bytes (K/M/G) as the style. Set the Decimal places option to control the desired amount of rounding.
Answer:C
IBM pdf LOT-835기출문제 LOT-835 LOT-835 LOT-835 LOT-835인증
NO.26 Chris has a LotusScript agent with profiling enabled. After the agent has run, where should Chris look
for the profile statistics?
A.In the local Log (log.nsf) database
B.In the agent profile view of the database
C.In Domino Designer, Agent - View Profile Results
D.In the local Statistics And Reporting (statrep.nsf) database
Answer:C
IBM LOT-835자료 LOT-835
NO.27 Keiko is designing EmpSurvey.nsf, an employee survey application. The database needs to be able to
receive e-mailed documents. Which one of the following does Keiko need to do?
A.Create a mail-in database document in the Domino Directory.
B.Open the database properties and select Enable as mail-in database.
C.Create MailInDb document in DOMCFG.NSF, being sure to set Mailbox to EmpSurvey.nsf
D.Create a mapping in the Domino Directory to associate EmpSurvey.nsf with a mail server.
Answer:A
IBM dumps LOT-835시험문제 LOT-835 pdf
NO.28 Jason supports a suite of Notes applications related to the sales process. For a user to see a list of
product alerts pertaining to a given customer's order, the user will currently open a Customer document
from a view, then open an Order document from an embedded view, and then select a line item from the
order and click a button to open a list of any product alerts. How could the user experience change if
Jason were to offer his users a Composite Application?
A.Composite Applications are used to wire Notes and non-Notes applications. Since Jason's applications
are entirely Notes-based, Composite Applications are not applicable.
B.The user could select a Customer in one pane, see a list of orders display in a second pane, and select
an order to see the line items display in a 3rd pane. This could all be in a single context within the Notes
client.
C.The user could hover the mouse over a Customer in one pane, see a list of orders display in a second
pane, and hover the mouse over an order to see the line items display in a 3rd pane. This could all be in a
single context within the Notes client.
D.Composite Applications allow the use of AJAX features for a richer user experience and
subjectively-faster data transfers. Using OnMouseOver and other JavaScript events enables
context-sensitive popup displays. This results in a more Web-like interface from within the Notes client.
Answer:B
IBM pdf LOT-835시험문제 LOT-835인증 LOT-835
NO.29 To approve an expense report, Quy goes to a controlled-access section and marks the Status field
"Approved." Status is a sign-enabled field. Which one of the following describes when the signature is
attached?
A.Immediately
B.When the document is saved
C.When the document is mailed
D.When the document is encrypted
Answer:B
IBM자격증 LOT-835 dump LOT-835 pdf LOT-835
NO.30 Debbie has a Customer Contact form in her Customer Management form. When users are adding new
information to a document, the response time when moving from field to field is very slow. What should
Debbie do to improve the form performance?
A.Select the "Refresh document on save" option on the Form properties.
B.Deselect the "Recalculate computed fields" option on the Form properties.
C.Deselect the "Automatically Refresh Fields" option on the Form properties.
D.Select the "Refresh fields on keyword changes" option on the Form properties
Answer:C
IBM LOT-835인증 LOT-835 LOT-835덤프 LOT-835
IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의IBM인증 LOT-835덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의IBM인증 LOT-835덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의IBM인증 LOT-835덤프를 데려가 주시면 기적을 안겨드릴게요.
댓글 없음:
댓글 쓰기