2013년 8월 23일 금요일

3COM 인증한 3M0-211 덤프

3COM인증 3M0-211시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 3COM인증 3M0-211덤프를 강추합니다. ITExamDump의3COM인증 3M0-211덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.

ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

ITExamDump 제공 3COM 3M0-211시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 3COM 3M0-211덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 3COM 3M0-211덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. 3COM 3M0-211 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.

시험 번호/코드: 3M0-211
시험 이름: 3COM (Certified Enterprise LAN Specialist )

성공으로 향하는 길에는 많은 방법과 방식이 있습니다. 3COM인증 3M0-211시험을 패스하는 길에는ITExamDump의3COM인증 3M0-211덤프가 있습니다. ITExamDump의3COM인증 3M0-211덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.

3M0-211 덤프무료샘플다운로드하기: http://www.itexamdump.com/3M0-211.html

NO.1 Which two should be verified on either the Switch 7700 or the Switch 8800 when the
network is experiences a RIP problem? (Choose two)
A. Check if BP is enabled on the switches using RIP
B. Check if the RIP versions are the same on the router interfaces
C. Use the "display RIP-statistics" command to check all RIP routes on the switch
D. Use the "display RIP packet" command to check if the switch is sending/receiving RIP
updates
E. Use the "debugging RIP packet" command to check if the switch is sending/receiving
RIP updates
Answer: B,E

3COM시험문제   3M0-211인증   3M0-211기출문제   3M0-211

NO.2 Which three are key requirements for the Access Layer (edge) of the network?
(Choose three)
A. Multilayer traffic prioritization
B. Multiple priority queues per port
C. Hardware-based Access Control List (ACLs)
D. Rate limiting and remarking for outgoing traffic.
E. MAC address authorization or IEEE 802.1X Network Login
F. Resource Reservation Protocol (RSVP) bandwidth allocation
Answer: A,B,E

3COM   3M0-211자료   3M0-211

NO.3 What is the benefit of using the Switch 40x0 Family's Spanning Tree Ignore/Disable
feature?
A. Prevents disassociation of Layer 2 traffic from Layer 3 traffic.
B. Enables use of a routing protocol at Layer 2 to make forwarding decisions
C. Enables use of spanning Tree Protocol (STP) at Layer 3 to prevent loops in the
network
D. Supports use of routing paths at Layer 3, while Spanning Tree Protocol (STP)
manages Layer 2 switched links
Answer: D

3COM덤프   3M0-211최신덤프   3M0-211 dump

NO.4 Which three are security-design features that can be employed in enterprise
networks to improve security? (Choose three)
A. Enable IEEE 802 d link aggregation
B. Turn off IGMP snooping on all access-layer switches
C. Provide security for active devices using local or RADIUS authentication
D. Support IEEE 802.1X Network Login for authentication and authorization
E. Provide separate VLANs for management and wireless users with a VLAN-centric
design
F. Employee TCP Windowing and or IEEE802.3X Flow Control to minimize effects of
network attacks
Answer: C,D,E

3COM   3M0-211 dump   3M0-211   3M0-211   3M0-211   3M0-211 dump

NO.5 Which component of XRN technology is defined as "A set of interconnected
switches that support Distributed Device Management (DDM), Distributed Link
Aggregation (DLA) and Distributed Resilient Routing (DRR)"?
A. XRN Interconnect
B. XRN Distributed Fabric
C. XRN Interconnect Fabric
D. XRN Distributed Software
Answer: B

3COM최신덤프   3M0-211   3M0-211   3M0-211최신덤프

NO.6 The Switch 7700 or Switch 8800 can be used as the primary authentication service
or as a backup if the RADIUS server group is unavailable.
A. True
B. False
Answer: A

3COM   3M0-211 dump   3M0-211

NO.7 Exhibit:
Which three Ethernet modes are supported on the Switch 7700 8-port
1000BASE-T(3c16859)Interface Module? (Choose three)
A. 10 Mbps in full duplex only
B. 10 Mbps in half/full duplex mode
C. 100 Mbps in full duplex mode only
D. 100 Mbps in half/full duplex mode
E. 1000 Mbps in full duplex mode only
F. 1000 Mbps in half/full duplex mode
Answer: B,D,E

3COM   3M0-211   3M0-211최신덤프   3M0-211

NO.8 Which three are Quality of Service (QoS) features/functions on the Switch 8800?
(Choose three)
A. Has eight output queues per port
B. Supports Differentiated Services (DiffServ)prioritization
C. Uses a Randam Early Detection (RED) queue prioritization
D. Uses a Weihted Random Early Detection (WRED) queue prioritization
E. Can configure the priority queues "globally" across all I/O interfaces on a switch
F. Uses Resource Reservation Protocol (RSVP) to allocate bandwidth for high-priority
applications
Answer: A,B,D

3COM덤프   3M0-211 dumps   3M0-211   3M0-211   3M0-211   3M0-211기출문제

NO.9 Which three are benefits/features of the 3Com XRN technology? (Choose three)
A. Ensure continuous network availability
B. Supports enhanced network performance
C. Can be created using any IP-based switch
D. Create a path for future-proofing the network
E. Eliminates the need for hardware redundancy to achieve maximum network resiliency
Answer: A,B,D

3COM자격증   3M0-211기출문제   3M0-211   3M0-211   3M0-211덤프

NO.10 Which three components are required to create a local XRN solution (excluding the
appropriate 3Com switches? (Choose three)
A. 3Com Network Supervisor
B. XRN Fabric interconnect Modules
C. High-Bandwidth interconnect Cable
D. Gigabit Multilayer Switching Software V3.x
E. Gigabit Ethernet Layer switching modules
Answer: B,C,D

3COM dump   3M0-211덤프   3M0-211시험문제   3M0-211

NO.11 Which two should you verify on either the Switch 7700 or the Switch 8800 if the
network is experiencing an Open Shortest Path First (OSPF) problem? (Choose
two)
A. OSPF is enabled on all switch ports
B. VRRP is properly configured on the switch ports supporting OSPF
C. The Link State Database is the same for all routers in an OSPF area
D. The switch is sending/receiving OSPF Hello packets and Link State updates
Answer: C,D

3COM   3M0-211   3M0-211인증

NO.12 Which command shows the Quality of Service (QoS) settings for interface Modules
#2 Ethernet port #6 on the Switch 7700?
A. display qos Ethernet 6/2 all
B. display qos Ethernet 2/0/6 all
C. display qos-interface Ethernet 2/0/6 all
D. display qos-interface Ethernet 6/0/2 all
Answer: C

3COM   3M0-211인증   3M0-211   3M0-211

NO.13 Which two are functions of Switch 40x0 Family Multinetting? (Choose two)
A. Automatically assigns multiple VLANs on each router interface
B. Floods traffic from different subnets on the same broadcast domain
C. Enables configuration of multiple router interfaces for each VLan/broadcast domain
D. Enables multiple VLANs/broadcast domains to be configured for each router interface
Answer: B,C

3COM   3M0-211   3M0-211 dump

NO.14 Which three are recommended guidelines for an XRN network? (Choose three)
A. Only enable Rapid Spanning Tree Protocol (RSTP) or Spanning Tree Protocol (STP)
on edge switches
B. Do not insert Fabric interconnect Modules into the Super Stack 3 Switch 4900 or
Switch 40x0 switches
C. Run the same version of the Gigabit Multilayer Switching (MS) Software (4Xor
higher) across the fabric
D. Use fault-tolerant 3Comhardware, i.e the Switch 40x0 family that provides additional
levels of hardware fault tolerance
E. The XRN Fabric Modules should be installed while the fabric switch powered on. Hot
swapping XRN Fabric Modules is also recommended in the event of a failure
Answer: B,C,D

3COM   3M0-211   3M0-211자료

NO.15 Which four are Switching Fabric features/Functions on the Switch 8800? (Choose
four)
A. Each Switch Fabric has a data channel to every module
B. Supports a hot-swappable, load-balancing Switch Fabric.
C. There is a data channel between the two Switch Fabrics.
D. Each Switch Fabric has a management channel to every module
E. Supports a hot-standby, hot-swappable redundant Switch Fabric
F. The master Switch Fabric is always set to slot #1 unless the fabric in slot #1 fails
G. The master Switch Fabric provides route calculation and management for the entire
chassis
Answer: A,B,C,E

3COM시험문제   3M0-211   3M0-211   3M0-211   3M0-211   3M0-211

NO.16 What is the maximum number of Linux Aggregation load-balancing groups
supported on the Switch 7700?
A. 4 groups
B. 13 groups
C. 24 groups
D. 64 groups
E. 128 groups
Answer: D

3COM   3M0-211 dump   3M0-211   3M0-211   3M0-211인증

NO.17 Which Switch 7700 command would show if Port#4 on Ethernet Module #2 is a
member of a Link Aggregation (LA) group and is the "LA Master Port"?
A. display interface Ethernet 2/4
B. display interface Ethernet 2/04
C. display interface Ethernet 4/0/2
D. display link-aggregation Ethernet 2/4
E. display link-aggregation Ethernet 2/0/4
F. display link-aggregation Ethernet 4/0/2
Answer: B

3COM자격증   3M0-211인증   3M0-211 dumps   3M0-211기출문제   3M0-211덤프   3M0-211인증

NO.18 Which three are true statements regarding 10 Gigabit technology and/or 3Com
products? (Choose three)
A. The 3 Com XFP 10G Fiber Transceivers use LC connects
B. IEEE 802.3X defines the 10GBASE-CX4 standard for Twin axial
C. 3Com supports 10G interface Modules for both the Switch 7700 and Switch 8800
D. The 10GBASE-T standard requires four-pair Category 5 or two-pair Category 6 UTP
wiring
Answer: A,B,C

3COM pdf   3M0-211   3M0-211 dumps   3M0-211

NO.19 Which three are advantages of using 3Com's XRN Distribution Resilient Routing
(DRR) over Virtual Router Redundancy Protocol (VRRP)? (Choose three)
A. DRR is easy to configure and administer, VRRP is more complex to manage
B. DRR supports both IP unicast and IP multicast traffic, VRRP only supports IP unicast
routing
C. DRR fast failover is less than five seconds, VRRP fast failover can take as long as 60
seconds
D. DRR distributes routing table updates only, VRRP distributes the entire routing table
to update other devices
E. DRR distributes routing across all switches in the XRN Distributed Fabric on the
router interfaces, VRRP uses a single Master router for all routing
Answer: A,B,E

3COM자격증   3M0-211기출문제   3M0-211 dump   3M0-211

NO.20 Which two rules must be followed when configuring Link Aggregation groups on
the Switch 7700 1000BASE-T and 1000BASE-X modules? (Chosse two)
A. The Linux Aggregation group can start on any port.
B. All the ports in a Link Aggregation group must be consecutive
C. A single Link Aggregation group can span multiple Interface Modules
D. A maximum of eight ports can belong to a single Link Aggregation group
E. A maximum of twelve ports can belong to a single Link Aggregation roup
Answer: A,B

3COM기출문제   3M0-211   3M0-211   3M0-211자격증   3M0-211인증

ITExamDump는 여러분이3COM 인증3M0-211인증시험 패스와 추후사업에 모두 도움이 되겠습니다. ITExamDump제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다. 3COM 인증3M0-211 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이 시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump 3COM 인증3M0-211인증시험자료는 100% 패스보장을 드립니다.

댓글 없음:

댓글 쓰기