ITExamDump는ITExamDump의Microsoft인증 70-632덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Microsoft인증 70-632덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.
만약 여러분은Microsoft 70-632인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft 70-632패스는 쉬운 일은 아닙니다.Microsoft 70-632패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
Microsoft인증 70-632시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Microsoft인증 70-632시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Microsoft인증 70-632덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
시험 번호/코드: 70-632
시험 이름: Microsoft (TS:Microsoft Office Project 2007. Managing Projects)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 153 문항
업데이트: 2014-03-12
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인Microsoft인증 70-632시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. Microsoft인증 70-632시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의Microsoft인증 70-632덤프는 Microsoft인증 70-632시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Microsoft 70-632시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로Microsoft 70-632시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
많은 사이트에서도 무료Microsoft 70-632덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Microsoft 70-632데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리ITExamDump에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다
Microsoft 70-632인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는Microsoft 70-632있는지 없는지에 알고 싶어합니다. 만약Microsoft 70-632자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.
70-632 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-632.html
NO.1 You are creating a project management methodology.You document project management procedures
and create specialized project management process templates.
You need to apply the processes in the context of Microsoft Office Project Standard 2007.
What should you do first
A.Create a Project Guide.
B.Display the Task Driverspane.
C.Display the Hyperlinks column.
D.Display the Microsoft Office Online Web site.
Answer: A
Microsoft 70-632기출문제 70-632 70-632기출문제
NO.2 In Microsoft Office Project Standard 2007, you create three tasks in a project plan by using the manual
calculation mode.After you create the tasks, the Gantt chart displays the following image:
You need the Gantt chart to automatically display the tasks in sequence instead of in parallel.
What should you do
A.Display the Calendar view.
B.Perform a project calculation.
C.Set the project options so that Project automatically links inserted or moved tasks.
D.Set the project options so that Project automatically adds new resources and tasks.
Answer: B
Microsoft기출문제 70-632 70-632 70-632
NO.3 You plan the next phase of a project in more detail by creating new tasks in an existing project plan.You
insert a new task between two existing tasks.Microsoft Office Project Standard 2007 automatically
creates a predecessor and successor.
You need to disable the automatic creation of predecessors and successors.
What should you do
A.Turn off the autolink option.
B.Calculate multiple critical paths.
C.Delete links that you do not need.
D.Enable the manual calculation mode.
Answer: A
Microsoft 70-632 70-632자격증 70-632 70-632인증
NO.4 You are creating a project schedule in Microsoft Office Project Standard 2007.You set the project start
date to today and enter a task.You notice that the year shown in the project timescale does not match the
date shown in the date field.
You need the timescale to show the current year instead of the next year.
What should you do
A.Modify the project calendar.
B.Use the starting year for fiscal year numbering.
C.Set new tasks to start by default on the current date.
D.Set the label for the timescale year tier to Year 1, Year 2 & (From Start).
Answer: B
Microsoft최신덤프 70-632 pdf 70-632덤프 70-632 70-632
NO.5 You are reviewing a project schedule that you are tracking in Microsoft Office Project Standard
2007.You have saved a baseline.
You need to ascertain whether the milestones are on schedule.
What should you do
A.Display the Actual Work field in the Tracking table.
B.Display the Actual Work field in the Baseline table.
C.Display the Start Variance field in the Variance table.
D.Display the Actual Start Date field in the Tracking table.
Answer: C
Microsoft dump 70-632 70-632자료 70-632
NO.6 You are tracking a project in Microsoft Office Project Standard 2007.A task in the project schedule is
divided into two resource assignments.Each assignment will take 40 hours to complete.Resource A can
begin the first week of the project.Resource B can begin 1 week later.
You need the project schedule to reflect two resources with different start dates assigned to one task.
What should you do
A.Create one resource for the task, and then assign 80 hours of work to this resource.
B.Create a task that has a duration of 2 weeks, and then assign both resources to the task.For Resource
A, set the assignment to be front loaded.For Resource B, set the assignment to be back loaded.
C.Create a task that includes 40 hours of work and has a duration of 2 weeks.Assign both resources to
the task.For Resource A, set the start date to the beginning of the first week.For Resource B, set thestart
date to 1 week later.
D.Create a task that has a duration of 2 weeks, and then assign both resources to the task.Assign 40
hours of work to each resource.For Resource A, set the start date to the beginning of the first week.For
Resource B, set the start date to 1 week later.
Answer: D
Microsoft pdf 70-632 dump 70-632 70-632 70-632
NO.7 You are managing a project schedule in Microsoft Office Project Standard 2007.You create 100 new
tasks in the project plan.Each task has a duration of 5 days, which you indicate by entering 5 in the
Duration field.After every third task you create, Project displays a message about an alternative method of
setting the task duration.
You need to stop the message from appearing.
What are two possible ways to achieve this goal (Each correct answer presents a complete
solution.Choose two.)
A.Turn off the Project Guide.
B.In the message box, select the Dont tell me about this again check box.
C.In the general program options, disable the feature that provides advice about scheduling.
D.In the general program options, disable the feature that provides advice about using Project.
Answer: BD
Microsoft pdf 70-632 70-632 70-632최신덤프 70-632 70-632자격증
NO.8 You are using a project plan created by another person as an example of how to create a project in
Microsoft Office Project Standard 2007.However, you do not want the original authors name to be
associated with your project plan.
You need to remove the original project plan author's name from the project plan.
What should you do
A.Increase the macro security level to High.
B.Delete the user name from the program options.
C.Remove the authors resource from the resource pool.
D.Turn on the removal of information from the file properties.
Answer: D
Microsoft 70-632 70-632 dump 70-632 70-632시험문제
NO.9 You create a shared resource pool in Microsoft Office Project Standard 2007.You are allowed to use
only resources from the shared resource pool in your projects.
You need to ensure that Project issues a warning if you use resources that are not in the shared resource
pool.
What should you do
A.Turn on the Project Guide.
B.Activate the Advice about errors option.
C.Deactivate the automatic addition of new tasks and resources.
D.Start the Planning Wizard, and then choose the Advice about scheduling option.
Answer: C
Microsoft dump 70-632 70-632 dump 70-632기출문제
NO.10 You are creating a project schedule in Microsoft Office Project Standard 2007. You assign one resource
to a task that requires a constant effort over a fixed period of time. You need to set the task type so that
you can reduce the amount of work the original resource performs on the task by assigning additional
resources. What task type should you use?
A.fixed units, effort-driven
B.fixed duration, effort-driven
C.fixed units, non effort-driven
D.fixed duration, non effort-driven
Answer: B
Microsoft 70-632 70-632자격증 70-632 70-632시험문제 70-632
NO.11 In Microsoft Office Project Standard 2007, you create a new task in a project plan, and assign a
resource to the task.The default task duration is 1 day, and the default amount of work is 7 hours.
You need to change the calendar options to set the default amount of work to 8 hours.
What should you do
A.Set the hours per day to 8.
B.Set the hours per week to 40.
C.Set the days per month to 20.
D.Set the default start time to 8:00A.M.and the default end time to 4:00P.M.
Answer: A
Microsoft 70-632 70-632 70-632 70-632인증
NO.12 You are managing a project in Microsoft Office Project Standard 2007.You will be managing similar
projects in the future, and plan to reuse information from the current project.
You need to save the tasks, durations, views, and formatting of the current project for reuse.
What should you do
A.Save the project as a template.
B.Create a baseline of the project schedule.
C.Copy the project s rows from the Gantt Chart view into another project file.
D.Use the Organizer to transfer the information you want to save from your project into the Global.mpt file.
Answer: A
Microsoft인증 70-632인증 70-632자격증
NO.13 You create tasks in a project plan in Microsoft Office Project Standard 2007.
You need to see the project start and finish dates and the task start and finish dates on the table side of
the Gantt Chart view.
What should you do
A.Display the Work table.
B.Display the Schedule table.
C.Display the project summary task.
D.Generate the default project summary overview report.
Answer: C
Microsoft덤프 70-632 70-632 70-632 70-632 dumps
NO.14 You are tracking a project in Microsoft Office Project Standard 2007.Resources A and B are each
assigned to work 40 hours on a task.After each resource works 30 hours, you update the schedule to
reflect the actual work to date.Resource B estimates that she will need to work a total of 50 hours to
complete her task assignment.
You need to update the schedule to reflect the new Resource B work estimate.
What should you do
A.Set the Work value for the task to 50.
B.Set the RemainingWork value for the task to 50.
C.Set the Work value for the resource assignment to 20.
D.Set the RemainingWork value for the resource assignment to 20.
Answer: D
Microsoft시험문제 70-632최신덤프 70-632 70-632
NO.15 You measure the performance of a project you are tracking in Microsoft Office Project Standard 2007 by
updating the completion percentage of the tasks.The actual cost of work performed (ACWP) for all tasks
is $0.00.The project has a baseline and all values have been calculated.
You need to ensure that the ACWP shows data other than $0.00.
What should you do first
A.Assign budget resources to the project summary task.
B.Enter standard resource rates that are greater than zero.
C.Select the Manual calculation mode, and then perform a calculation.
D.Select the Physical % Complete option for earned value purposes.
Answer: B
Microsoft dumps 70-632인증 70-632 70-632
NO.16 In Microsoft Office Project Standard 2007, you create a task that includes 80 hours of work and has a
duration of 10 days.You assign one resource at 100 percent with a standard rate of $100 per hour,
resulting in an actual cost of $8,000.
You set the baseline.You set the status date to a date that is later than the task finish date, and set the
actual task finish date to the same date as the task finish date.The actual cost of work performed (ACWP)
changes to $7,900.
You need the ACWP to equal the actual cost.
What should you do
A.Add an hour of work on the working day after the actual finish.
B.Change the baseline cost to $7,900 and then recalculate the project schedule.
C.Change the default end time for project tasks to 5:00 P.M., and re-enter the actual finish date.
D.Reduce the resource standard rate to $79, save a baseline, and then recalculate the project schedule.
Answer: C
Microsoft 70-632덤프 70-632 70-632 70-632자료
NO.17 In Microsoft Office Project Standard 2007, you create the following project plan:
A.Display the Task Usage view.
B.Display the Task Drivers pane.
C.Display the Resource Usage view.
D.Display the Project Information dialog box.
Answer: B
Microsoft자료 70-632 70-632 70-632덤프
NO.18 You use Microsoft Office Project Standard 2007 to manage project schedules.The fiscal year of your
organization starts in July.
You need to apply this fiscal year to all future projects by using the options.
What should you do
A.Set July as the start of the fiscal year, and make this the default.
B.Create a project plan template with the project start date set to June 30.
C.Create a project plan template with the project start date set to July 1.
D.Set July as the start of the fiscal year, and use the starting year for numbering.
Answer: A
Microsoft자격증 70-632기출문제 70-632최신덤프 70-632 70-632
NO.19 You are opening old project schedule in Microsoft Office Project Standard 2007.The Project files have
been customized to prompt you for your username before opening, so Project can log your actions.When
you open the files, you notice that the prompt does not appear and logging does not take place.
You need to restore the functionality in the files.
What should you do
A.Change the file extension to .mcr.
B.Decrease the macro security level to Medium.
C.Set the macro security level to allow only macros installed in trusted locations.
D.Activate the Allow loading files with legacy or non default file formats option.
Answer: B
Microsoft 70-632인증 70-632 70-632
NO.20 You are tracking a project in Microsoft Office Project Standard 2007.
For the work performed to date, you need to know whether the actual cost exceeds the budget.
What should you do
A.Set the status dateto the beginning of the project, and then establish whether the earned value cost
variance (CV) is negative.
B.Set the status dateto the last status update deadline, and then compare the estimate at completion
(EAC) to the budgeted cost of work scheduled (BCWS).
C.Set the status dateto the end of the project, and then compare the actual cost of work performed
(ACWP) to the budgeted cost of work scheduled (BCWS).
D.Set the status dateto the last status update deadline, and then compare the actual cost of work
performed (ACWP) to the budgeted cost of work scheduled (BCWS).
Answer: D
Microsoft 70-632인증 70-632 70-632인증
ITexamdump의 700-101덤프의 VCE테스트프로그램과 000-N37덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-643시험에 대비한 고품질 덤프와 C_TERP10_65시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B25시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기