EMC 인증한 E20-361 덤프

ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게EMC인증E20-361시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.

어떻게EMC인증E20-361시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,EMC인증E20-361시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제EMC인증E20-361시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건EMC인증E20-361시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한EMC인증E20-361시험자료를 여러분들한테 선사하겠습니다.

ITExamDump는 여러분이 빠른 시일 내에EMC E20-361인증시험을 효과적으로 터득할 수 있는 사이트입니다.EMC E20-361인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.EMC E20-361인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.

시험 번호/코드: E20-361

시험 이름: EMC (Network Attached Storage (NAS) Implementation Exam)

ITExamDump에는EMC E20-361인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.

ITExamDump의 EMC인증 E20-361시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. EMC인증 E20-361덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 EMC인증 E20-361덤프가 있으면 시험패스가 한결 간편해집니다.

ITExamDump의EMC인증 E20-361시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. EMC인증 E20-361덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

E20-361 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-361.html

NO.1 You have moved a VDM from one Data Mover to another. Now the users cannot access the data. What
could cause this condition?
A.Interface names are different to the source VDM.
B.The IP address on the target Data Mover is set before the move.
C.Target Data Mover sees all file systems of the source VDM.
D.You keep the same IP addresses.
Answer:A

EMC   E20-361   E20-361기출문제   E20-361

NO.2 What application provides integration between the Celerra and the iSCSI host for replicating an iSCSI
LUN?
A.Replication Manager
B.Unisphere Manager
C.Navisphere Manager
D.Celerra Manager
Answer:D

EMC   E20-361덤프   E20-361

NO.3 You just created a new file system and exported it as an NFS export. You are informed that someone
deleted the .etc configuration directory.
What would be the best way to prevent this in the future?
A.Remove write permission on the .etc directory.
B.Export a subdirectory of the root file system.
C.Educate users about deleting system directories.
D.Set the hidden attribute on the root directory.
Answer:B

EMC자료   E20-361시험문제   E20-361   E20-361시험문제   E20-361자료

NO.4 An administrator wants to present several CIFS shares to users through one file server. The shares are
stored on many physical machines. What can be used with the Celerra to achieve this goal?
A.Celerra global CIFS server
B.Default CIFS server
C.Distributed File System
D.Virtual Data Mover
Answer:C

EMC   E20-361 pdf   E20-361 dumps

NO.5 You are implementing a Celerra CIFS solution. When discussing the mapping method choices, the site
administrator asks you to explain the significance of the user mapping method for CIFS users.
How do you respond to the site administrator?
A.CIFS servers that join the Windows domain are assigned domain SIDs. The mapping method is used to
uniquely identify the CIFS servers in the Windows AD domain to UNIX NFS servicers in the NIS domain.
B.Celerra has a UxFS-based file system that requires UNIX style UIDs and GIDs for file and directory
permissions. Windows users and groups are identified with SIDs. The mapping method correlates UNIX
UIDs and GIDs to Windows SIDs for uniquely identifying users.
C.Celerra has a UxFS-based file system that stores UNIX style UIDs and GIDs and Windows SIDs for file
and directory permissions. The mapping method correlates the SIDs for local group permissions on the
CIFS server shares.
D.Stand-alone CIFS servers require a manual SID assignment when configured on a Celerra. When
users from the Windows domain access the Celerra the mapping method correlates the stand-alone CIFS
server SID with the Windows user SIDs.
Answer:B

EMC   E20-361시험문제   E20-361기출문제   E20-361최신덤프

NO.6 How is Kerberos used within the Active Directory?
A.For user authentication
B.Provides encryption of stored user passwords
C.For time synchronization
D.Provides Dynamic DNS updates
Answer:A

EMC   E20-361인증   E20-361 dumps   E20-361

NO.7 Which component of SnapSure identifies changed data blocks in the production file system?
A.Bitmap
B.Blockmap
C.Superblock
D.Inode
Answer:A

EMC   E20-361   E20-361자료   E20-361최신덤프   E20-361기출문제

NO.8 Which Celerra feature stores Windows SIDs correlated to UIDs and GIDs?
A.ntxmap
B.NASDB
C.secmap
D.SavVol
Answer:C

EMC dumps   E20-361   E20-361인증   E20-361   E20-361

NO.9 What is the default result of joining a CIFS server to a Windows Active Directory domain?
A.The CIFS server shares are dynamically updated in DNS.
B.The CIFS server interface is dynamically assigned from Active Directory.
C.The "EMC Celerra" container is created in Active Directory.
D.The CIFS server is added to the Active Directory Computers container.
Answer:C

EMC기출문제   E20-361   E20-361시험문제

NO.10 Which statement describes Celerra gateway Fibre Channel connectivity between the blades and the
back-end storage?
A.CLARiiON back-end storage can only be connected to blades via direct connection.
B.Symmetrix back-end storage can only be connected to blades via direct
C.Symmetrix back-end storage can only be connected to blades via switched fabric.
D.CLARiiON back-end storage can only be connected to blades via switched fabric.
Answer:C

EMC인증   E20-361기출문제   E20-361   E20-361최신덤프   E20-361시험문제   E20-361

NO.11 You are implementing a CIFS solution and will possibly be using Virtual Data Movers. Which CIFS
dynamic configuration information is contained within the Virtual Data Mover?
A.Virus checker configuration
B.CIFS startup configuration
C.DFS root ID information
D.Share information
Answer:D

EMC   E20-361 dumps   E20-361   E20-361자격증   E20-361기출문제

NO.12 How does the Control Station access disk partitions on the back-end storage?
A.FC
B.NBS
C.iFCP
D.iSCSI
Answer:B

EMC   E20-361   E20-361최신덤프   E20-361   E20-361

NO.13 File systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs and CIFS
D.iSCSI LUNs
Answer:B

EMC dumps   E20-361덤프   E20-361덤프   E20-361   E20-361

NO.14 A user needs to test new software with existing data stored on a Celerra file system that has
checkpoints. The Celerra administrator is asked to mount a SnapSure checkpoint from the file system to a
different Data Mover.
Can the administrator fulfill this request? Why or why not?
A.Yes, but only if the checkpoint is mounted read-only
B.Yes, but the checkpoint cannot be restored to the PFS
C.No, because the checkpoint relies on the PFS
D.No, because a writeable snap is required for testing
Answer:C

EMC덤프   E20-361자료   E20-361   E20-361자료

NO.15 ile systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs
D.iSCSI LUNs and CIFS
Answer:B

EMC   E20-361   E20-361덤프   E20-361최신덤프   E20-361

NO.16 Which Celerra Data Mover file controls both the services used for name resolution and the order in
which they are used?
A.nsswitch.conf
B.nslookup.conf
C.hosts.conf
D.resolv.conf
Answer:A

EMC기출문제   E20-361   E20-361 dump   E20-361최신덤프

NO.17 You have decided to use the Automatic SavVol Extension. For a Celerra of 200 GB a SavVol with 20
GB is created.
What is the size of the next Automatic SavVol Extension when HWM is reached?
A.20 GB
B.20 MB
C.64 MB
D.64 GB
Answer:A

EMC인증   E20-361최신덤프   E20-361 dump

NO.18 Which describes how a Usermapper client resolves a Windows SID to UNIX UID/GID?
A.Uses the resolution order defined in the Data Mover nsswitch.conf file
B.Broadcasts over the internal Celerra network for secmap cache on server_2
C.Uses the ntxmap.conf file first, then the Data Mover secmap cache
D.Broadcasts over the internal Celerra network for a primary or secondary Usermapper service
Answer:D

EMC   E20-361   E20-361   E20-361 pdf   E20-361 pdf

NO.19 A Celerra file system has a SnapSure schedule enabled for daily checkpoints. By using the Microsoft
Shadow Copy Client, a user can see previous versions of a certain file up to a certain date in the past, but
nothing else after that.
What could be the cause of this issue?
A.Checkpoints are currently being used by an application.
B.All of the checkpoints have been refreshed.
C.There have been no changes to the file.
D.The SavVol has reached a full state.
Answer:D

EMC최신덤프   E20-361   E20-361인증   E20-361시험문제

NO.20 The storage administrator would like to know if more AV servers are necessary for optimal
performance and protection.
Which tool can the system administrator use to analyze current utilization of the antivirus environment?
A.CAVA Calculator
B.NAS Support Matrix
C.CAVA Sizing Tool
D.Celerra Monitor
Answer:C

EMC자격증   E20-361   E20-361

만약EMC인증E20-361시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는EMC인증E20-361시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다