현재Oracle 1Z1-478인증시험을 위하여 노력하고 있습니까? 빠르게Oracle인증 1Z1-478시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로Oracle 1Z1-478인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
ITExamDump는 유일하게 여러분이 원하는Oracle인증1Z1-478시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.
ITExamDump의 Oracle인증 1Z1-478시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Oracle인증 1Z1-478덤프가 신뢰성을 다시 한번 인증해주는것입니다. Oracle인증 1Z1-478시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Oracle인증 1Z1-478덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.
우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Oracle인증1Z1-478시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며1Z1-478시험은 한번에 패스할 수 있는 덤프입니다.
시험 번호/코드: 1Z1-478
시험 이름: Oracle (Oracle SOA Suite 11g Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2013-10-27
1Z1-478 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z1-478.html
NO.1 Identify two correct descriptions of Oracle Web Services Manager (OWSM).
A. It enables you to externalize web services security from the applications youbuild.
B. It manages policies in a distributed policy manager that serves as a single policy enforcement
point.
C. Use security and management events, captured by OWSM agents, are displayed using Oracle
BAM.
D. It supplies predefined security policies that enable declarative security and management
definition.
E. It uses Oracle Event Processing (OEP) to determine when security violations have occurred.
Answer: B,C
Oracle최신덤프 1Z1-478 1Z1-478
Explanation:
Note: *Oracle WSM allows companies to (1) centrally define and store declarative policies applied
to the multiple web services making up a SOA infrastructure, (2) locally enforce security and
management policies through configurable agents, and (3) monitor runtime security events such as
failed authentication or authorization.
*Oracle Web Services Manager offers a comprehensive and easy-to-use solution for policy
management and security of service infrastructure. It provides visibility and control of the policies
through a centralized administration interface offered by Oracle Enterprise Manager.
NO.2 Which two features are provided by decision tables?
A. Sets of input data can be bucketed and reviewed for gaps.
B. Data sets can be reviewed for conflicts.
C. Data can be used for only one rule evaluation.
D. A rule evaluation can be used only to enter new output data.
Answer: A,B
Oracle 1Z1-478 dumps 1Z1-478인증 1Z1-478 1Z1-478
Explanation:
After you create a Decision Table there are operations that you may want to perform on the
Decision Table, including the following:
(A)Find and fix gaps in a Decision Table (B)Finding and resolving conflicts between rules in a
Decision Table Compact or split cells in a Decision Table Merge a condition or split a condition in a
Decision Table
A: *Compact the Decision Table
In this step you compact the rules to merge from eighteen rules to nine rules. This automatically
eliminates the rules that are not needed and preserves the no gap, no conflict properties for the
Decision Table.
*The Conditions area in a Decision Table includes one or more condition rows. Each condition row
has a condition expression and, for each rule, a condition cell. A condition expression is an
expression that you build in Rules Designer. The condition expression is often a fact property or a
function result, but it can be any expression that has a type that can be associated with a bucketset.
B:A Decision Table displays multiple related rules in a single spreadsheet-style view. In Rules
Designer a Decision Table presents a collection of related business rules with condition rows, rules,
and actions presented in a tabular form that is easy to understand. Business users can compare cells
and their values at a glance and can use Decision Table rule analysis features by clicking icons and
selecting values in Rules Designer to help identify and correct conflicting or missing cases.
NO.3 In your solution, a web service client needs to invoke a series of three web services in support
of a single transaction. The third web service needs the identity of the original web service client.
Which statement describes how the identity is made available by Oracle Web Services Manager
(OWSM)?
A. The transaction manager accesses an internal table that maintains credentials used to invoke
each individual web service in the chain.
B. Each web service in the chain does its own authentication so the third web service handles its
own identity checking.
C. OWSM sets the user in the Java Authentication and Authorization (JAAS) Subject when the first
web service successfully authenticates, and the Java Subject is used by subsequent web services to
access the identity.
D. OWSM stores a SAML token from the first web service invocation in a database table, and that
table is accessed by subsequent web services in the chain to retrieve identity.
Answer: D
Oracle인증 1Z1-478 1Z1-478 dumps 1Z1-478인증 1Z1-478
Explanation:
Oracle Web Services Manager is a component of the Oracle Enterprise Manager Fusion Middleware
Control, a run-time framework that provides centralized management and governance of Oracle
SOA Suite environments and applications. You create and configureOracle Web Services Manager
policies in Oracle Enterprise Manager, and those policies are persisted in a policy store (a database
is recommended). Oracle Web Services Manager lets you define policies against an LDAP directory
and generate standard security tokens (such as SAML tokens) to propagate identities across multiple
Web services used in a single transaction.
NO.4 Composite X invokes an outbound DB adapter to write data to a database table. You have
configured JCA at the binding component as follows:
<property name = "jca.retry.count" type = "xs:int" many = "false" override = "may" > 2</property>
<property name = "jca.retry.interval" type = "xs:int" many = "false" override = "may" > 2</property>
You have also modeled a modeled a fault policy to retry the invocation three times in case of
remoteFault as follows:
<retryCount>3<retryCount>
<retryInterval>3<retryInterval>
Which result describes what happens when the database that is being accessed by the above
binding component goes down?
A. The invocation is retrieved for a total of two times every two seconds. Fault policy retries are
ignored.
B. The invocation is retried for a total of six times every three seconds.
C. The invocation is retried for a total of six times every two seconds.
D. The fault policy retries occur within the JCA retries. So two JCA retries are executed two seconds
apart. Within each JCA retry, three fault policy retries are executed three seconds apart.
E. The JCA retries occur within the fault policy retries. So three fault policy retries are executed
three seconds apart. Within each fault policy retry, two JCA retries are executed two seconds apart.
Answer: E
Oracle 1Z1-478자격증 1Z1-478자격증 1Z1-478인증
Explanation:
Note: *Global retries for any error handling are returned to the BPEL Receive activity instance, for
example, or, more generally, to the point at which the transaction started. Such a retry could occur
if there was an error such as a temporary database fault. The default retry count is by default
indefinite, or specified in the jca.retry.count property.
*Properties you can specify in the composite.xml file include:
/jca.retry.count
Specifies the maximum number of retries before rejection. Again, specifying this value is a pre-
requisite to specifying the other property values.
/jca.retry.interval
Specifies the time interval between retries (measured in seconds.)
*A remoteFault is also thrown inside an activity. It is thrown because the invocation fails. For
example, a SOAP fault is returned by the remote service.
NO.5 Identify two features of Oracle BAM.
A. Enterprise Manager's monitoring capabilities are central to Oracle BAM's ability to monitor
performance indicators.
B. You can analyze and present Information from activities spanning multiple systems and
applications.
C. Rich browser-based dashboards provide visibility into current values of key performance
indicators (KPIs).
D. There is a built-in trouble ticket system to track assignment and completion of corrective actions.
Answer: A,C
Oracle 1Z1-478 1Z1-478 1Z1-478 1Z1-478
Explanation:
Note: *Oracle Business Activity Monitoring (Oracle BAM) gives business executives the ability to
monitor their business services and processes in the enterprise, to correlate KPIs down to the actual
business process themselves, and most important, to change business processes quickly or to take
corrective action if the business environment changes.
NO.6 Which two approaches are valid when using dynamic partner links in a BPEL process?
A. A WSDL file, which contains multiple services that use the same portType, is available at design
time, but the decision to determine which service is used can only be made at runtime.
B. When the BPEL process is designed, the endpoint URL of the WSDL file is known but the services
and port types are not known.
C. When the BPEL process is designed, the services and port types of the WSDL file are known but
the endpoint URI is not known.
D. A WSDL file, which contains multiple services that use different portTypes, is available at design
time, but the decision to determine which server us used can only be made at runtime.
Answer: A,C
Oracle 1Z1-478 1Z1-478 1Z1-478인증
Explanation:
A (not D):How To Create a Dynamic Partner Link at Design Time for Use at Runtime
To create a dynamic partner link at design time for use at runtime:
etc
C (not B):The BPEL specification mandates that only the partner endpoint reference (EPR) can be
changed dynamically. In BPEL terms, only the partnerRole of a partner link element can have a new
value assigned. The myRole value doesn't change after the BPEL has been deployed.
Note: *Dynamic Partner Links and Dynamic Addressing During the design-time of an application,
you may need to configure certain services whose endpoints (addresses) are not known beforehand,
or it may be necessary to change an endpoint reference while the application is running. The
Dynamic Partner link feature allows you to dynamically assign an endpoint reference to the partner
link. This means that you can use onepartner link for subsequent calls to different web-services
(provided that the services use the same interface). *For successful deployment of the process, a
partner link should be completely defined. When you deploy the project, the WSDL file for the
partner link should contain and define both the abstract and the concrete information for the
partner link, including address and port, though later the concrete information can be changed
independently from the WSDL file.
NO.7 When more than one policy is attached to a policy subject, the combination of policies needs
to be valid. Which statement is true about the valid combination of policies for a policy subject?
A. Only one MTOM policy can be attached to a policy subject.
B. More than one Reliable Messaging policy can be attached to a policy subject.
C. Both a Reliable Messaging policy and a WS-Addressing policy cannot be attached to the same
policy subject.
D. Only one security policy can be attached to a policy subject.
Answer: A
Oracle 1Z1-478 1Z1-478 dumps 1Z1-478
Explanation:
Note:
*Within a SOA composite application, you must attach the Oracle WS-MTOM policy to service and
reference binding components to receive and send MTOM (MIME binary) attachments within
Oracle SOA Suite.
*Message Transmission Optimization Mechanism (MTOM)
Ensures that attachments are in MTOM format. This format enables binary data to be sent to and
from web services. This reduces the transmission size on the wire.
*ReliabilityPolicy
Supports the WS-Reliable Messaging protocol. This guarantees the end-to-end delivery of
messages.
* Addressing Policy Verifies that simple object access protocol (SOAP) messages include
WS-Addressing headers in conformance with the WS-Addressing specification. Transport-level data
is included in the XML message rather than relying on the network-level transport to convey this
information.
NO.8 A partner needs to access services that are defined in one of your Service Composite
Architecture (SCA) applications via a web service interface. Which approach (and accompanying
reasoning) describes a loosely coupled and robust solution?
A. Use Oracle Service Bus to provide an Interface layer over your SCA application. This enables you
to hide the locations of your SCA application, perform load-balancing across those endpoints, and
provide the ability to define service level agreements to help ensure that you are meeting your
contractual obligations to the partner.
B. Use the Mediator component to provide a web service interface to your SCA application. This
arrives you the flexibility of using the industry standard XSLT technology to perform translation and
transformations.
C. Use Oracle Service Bus to provide an interface layer over your SCA application. This enables you
to "skin" your SCA application with a web service interface and still provide a robust experience to
the partner.
D. Allow the partner simply to connect directly to the SCA application. This provides the best
performance and helps keep the partner happy.
Answer: B
Oracle최신덤프 1Z1-478 1Z1-478
NO.9 You expand a business rule component that a colleague added to the BPEL process. You see an
Assign element named Facts_To_Rule_Service.
Which statement is true bout this Assign element?
A. It was added automatically based on entries that your colleague made in the dialog box that
approved when the business rule component was added to the BPEL model.
B. Your colleague manually added this Assign element after adding the business rule component to
the BPEL Model.
C. This Assign element was automatically added when your colleague manually addedthe
corresponding Rule_Service_To_Facts assign to the BPEL model.
D. You can delete this Assign because it was created for documentation purposes only.
Answer: A
Oracle최신덤프 1Z1-478 1Z1-478자료 1Z1-478인증 1Z1-478
Explanation:
Note: *Facts_To_Rule_Service: Assigns the facts to a variable.
ITexamdump의 ST0-202덤프의 VCE테스트프로그램과 000-588덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-T01D시험에 대비한 고품질 덤프와 156-215.13시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-027시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기