여러분은Microsoft 70-545인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해Microsoft 인증70-545시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.
멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. Microsoft인증 70-545시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의Microsoft인증 70-545덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의Microsoft인증 70-545덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.
ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증70-545시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이Microsoft인증70-545시험에 대한 부담은 사라질 것입니다.
시험 번호/코드: 70-545
시험 이름: Microsoft (TS: Microsoft Visio 2007, Application)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2013-10-11
70-545 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-545.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster, objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage references the current page. The object objWindow references the active window. You need to create several shape instances of the master on the current page at specific coordinates in the active window. Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
Microsoft최신덤프 70-545시험문제 70-545 70-545 70-545 70-545
NO.2 You are developing an Office Visio 2007 SharedAdd-in.
You construct an event sink class that listens to events from the Visio 2007 Application,
Document, Page, and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCodeAs Short,
ByVal sourceAs Object,
ByVal eventIdAs Integer,
ByVal eventSequenceNumberAs Integer,
ByVal subjectAs Object,
ByVal moreInformationAs Object)As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft인증 70-545자료 70-545 70-545자격증 70-545기출문제 70-545 dump
NO.3 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007.
The solution must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs. Users
must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft 70-545최신덤프 70-545 70-545 70-545
NO.4 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft 70-545자격증 70-545 dump 70-545 pdf
NO.5 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by using a Dynamic Connector shape. In your application, you create an object named myVisioApp that references the Visio Application object. You need to add code to your application to connect the 2-D shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2), visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) , visAutoConnectDirRight )
Answer: C
Microsoft pdf 70-545 70-545 dump 70-545시험문제
NO.6 You have a Windows Forms application that contains an embedded Visio Drawing Control.
You have an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the
application to load and display the drawing as a template by using the Visio Drawing Control.
Which code should you add to the application?
A. Me.axDrawingControl1. Document.Application.Documents.Open( "C:\Template.VSD ")
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked) Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft 70-545 70-545
NO.7 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an action after the Visio 2007 application flushes its events queue. What should you do?
A. ListenforAppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft최신덤프 70-545자료 70-545 70-545
NO.8 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the event that there is a fault in the application. What are three possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. CreateaVBAsolution.
B. CreateaVSLsolution.
C. Create an EXE add-on solution.
D. CreateaSharedAdd-insolution,andthenusetheCOMShimWizardtocreateaDLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
Microsoft pdf 70-545 dumps 70-545시험문제 70-545
NO.9 You create a custom template and several custom stencils. You need the stencils to open automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft자격증 70-545자료 70-545 70-545
NO.10 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft 70-545인증 70-545 dumps 70-545 70-545
ITexamdump의 MB6-700덤프의 VCE테스트프로그램과 70-463덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-B25시험에 대비한 고품질 덤프와 HP2-B101시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N35시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기